The short answer
Leave auto-tagging on in every office's Google Ads account. It adds the click ID that conversion tracking and GA4 rely on.
Give each office one lowercase slug and add it as utm_content in the final URL suffix, at the campaign or ad group level. GA4 uses Google Ads names for source, medium, and campaign, but it still reads utm_content, so the office label comes through.
Then point every ad at the https address of the right office page, keep patient details out of every URL, and use Test after each change.
What happens on a click
Every ad has a final URL: the page a patient lands on. Google Ads can add three kinds of extra information to that address, set in URL options.
Added by Google
Auto-tagging
Google Ads adds a click ID, called gclid, to the address. Google says it is needed to track conversions on all browsers, import offline conversions, and bring Google Ads data into GA4.
Added by you
Final URL suffix
Parameters you type once, such as utm_content=north-park, that Google adds to the end of the landing page address.
Only if you use one
Tracking template
An address for an outside click tracker. With parallel tracking, Google sends the patient straight to the page and loads the template in the background.
Auto-tagging is on by default for new accounts. Parallel tracking is required for Search and Performance Max campaigns, so a tracking template no longer sits between the patient and the page. If you measure with Google Ads and GA4 and use no outside click tracker, auto-tagging and a suffix may be all you need.
What GA4 reads
When a click arrives with both a click ID and UTM tags, GA4 does not treat them the same way.
| Part of the address | What GA4 does with it |
|---|---|
| Source, medium, and campaign | Taken from auto-tagging when a click ID is present, even if the address also has UTM tags. |
| utm_content | Still read. It shows as Manual ad content, so it can carry the office slug. |
| utm_term | Still read. It shows as Manual term. |
| A click ID that cannot be used | GA4 takes every traffic value from the UTM tags instead, which is why Google recommends setting source, medium, and campaign whenever you set one. |
Google Ads Help adds that GA4 has no setting to let UTM tags override auto-tagging. So do not try to rename Google Ads traffic with utm_source. Use utm_content for the office, and keep every value lowercase, because GA4 treats North-Park and north-park as different.
Putting the office on every click
Pick one slug per office, such as north-park, and use it everywhere: ads, the Business Profile link, email, and the per-office report. A written slug list helps keep two people from labeling the same office two ways.
A suffix for an office could read: utm_source=google&utm_medium=cpc&utm_campaign=implants&utm_content=north-park. Google adds it to the end of the final URL. You type only the parameters, with no question mark in front.
The same slug belongs in your Business Profile links and in the office field your GA4 events carry, so a report can line up ad visits, profile visits, and bookings for one office.
Where to set it
URL options can be set for the account, a campaign, an ad group, an ad, a keyword, or a sitelink. For tracking templates, Google uses the most specific one: keyword, then ad, ad group, campaign, and account.
One campaign per office
The campaign name can already say which office it is. Add the office slug in utm_content at the campaign level anyway, so every report uses the same label.
One campaign for several offices
Give each office its own ad group with its own office page as the final URL, and set utm_content at the ad group level.
Group-wide settings
Account-level URL options suit values that are the same everywhere, such as utm_source=google and utm_medium=cpc. Keep office labels lower down.
Set URL options at the account, campaign, or ad group level where you can. Google says changes there do not send ads back to review, while edits to an ad, keyword, or sitelink do. Office campaigns themselves are covered in office addresses in Google Ads.
Redirects and old domains
Groups change domains after an acquisition or a rebrand, and old office addresses start to redirect. Google says that if your site uses redirects, the click ID has to reach the final page, or conversions are not tracked.
Google's destination policy also disapproves final URLs that redirect people to a different domain, and tracking templates that do not lead to the same content as the final URL. After a domain move, update the final URL on every office ad to the new address instead of relying on the redirect.
Planning the move itself is in one domain versus office sites.
Office ad URL check
Paste one line per office ad. The check builds the landing page address the way Google adds the suffix, reads the office label, and flags typed click IDs, leading question marks, repeated tags, capitals and spaces, missing source or medium, labels shared by two offices, templates without {lpurl}, and anything that looks like an email or phone number.
No patient details in URLs
Google Analytics policy does not allow sending personal details to Google, and its help pages say page addresses and UTM values must be free of them. An ad URL should carry page and campaign labels only: never a name, email, phone number, or what a visit was for.
The same goes for thank-you and booking pages that a form or scheduler builds on the fly. If those addresses can include what a patient typed, fix that before tags fire on them. Which pages and tools touch patient information is a question for your compliance lead. This is marketing and web guidance. It is not legal advice.
Testing a change
- Open URL options where you made the change and click Test. Google combines the final URL with your tracking to show the landing page address.
- Open that address on a phone and a computer. The right office page should load with no error and no redirect.
- Check that the office slug in the address matches your slug list.
- Give it a couple of days. Google says tracking template changes take 24 to 48 hours to reach serving ads.
- In GA4, look at Manual ad content for Google Ads traffic and confirm each office's slug shows up on its own row.
Red flags
Auto-tagging turned off
Google says auto-tagging is needed to track conversions on all browsers and to import offline conversions.
UTM tags typed into every ad's final URL
Edits at the ad level go back to review. Campaign and ad group URL options can change without it.
The same label on two offices
GA4 cannot tell the offices apart, and one office gets the other's visits.
Mixed capitals
GA4 values are case sensitive, so North-Park and north-park become two rows.
A tracking template with no {lpurl}
Google says the landing page breaks without it.
Final URLs that redirect to a new domain
Google's destination policy disapproves final URLs that redirect people to a different domain.
Checklist
Office ad URL checklist
0 of 12 done
Related guides
Splitting budget and counting calls by office is in Google Ads budgets and call attribution for groups. Who owns each office's account is in Google Ads accounts the group owns.
The same job for Bing ads is in Microsoft UET tags and goals for dental groups, and the map of the other group jobs is marketing a multi-location practice or DSO.
For a multi-office group
DDS Web Solutions builds websites and runs search, ads, and reporting for dental practices. Our team has been building websites since 2014, we have served 100+ practices, and our offices are in Sacramento and San Mateo.
For a group, we can write the slug list, move tags into URL options, check every office's final URLs after a domain change, and confirm in GA4 that each office's ad visits show up under its own label.
FAQ
Do we need UTM tags at all if auto-tagging is on?
Not for source, medium, and campaign: GA4 takes those from auto-tagging. An office label in utm_content is still useful when one campaign covers several offices, because GA4 keeps reading utm_content. If you add any UTM tag, Google recommends adding source, medium, and campaign as well.
Can GA4 let our UTM tags override auto-tagging?
No. Google Ads Help says that in GA4, auto-tagging takes priority over manual tagging because there is no override option. Plan on Google Ads names for source, medium, and campaign, and use utm_content for the office.
Should we put the office slug in the campaign name instead?
If each office has its own campaign, the campaign name already does that job. Add utm_content as well, so the same slug shows up in GA4 and the per-office report, whatever the campaign is called.
How long does a change take to show?
Google says changes to tracking templates take 24 to 48 hours to reach ads that are serving. Use the Test button right away, then check a few days of GA4 data.
Our site broke when auto-tagging was turned on. Why?
Google notes that a small share of sites reject unknown URL parameters and show an error page. Ask your web developer to allow them, then turn auto-tagging back on and test by opening the ad's landing page.
Can we pass the patient's appointment or form details back in the URL?
No. Google Analytics policy says no personal details in page addresses or UTM values. Keep URLs to page and campaign labels only, and ask your compliance lead about anything that touches patient information.
Sources
- Google Ads Help: About tracking in Google Ads
- Google Ads Help: Add a final URL suffix
- Google Ads Help: About auto-tagging
- Google Ads Help: Set up tracking with ValueTrack parameters
- Google Ads Help: About ValueTrack parameters
- Google Ads Help: Create custom parameters for advanced tracking
- Google Ads Help: About parallel tracking
- Google Advertising Policies Help: Destination requirements
- Google Analytics Help: Traffic-source dimensions, manual tagging, and auto-tagging
- Google Analytics Help: URL builders
- Google Analytics Help: Best practices to avoid sending personally identifiable information